Flexo Printer Slotter Die Cutting with Stacker

   Die Cutting Unit




Die Cutting Anvil

  • Made from seamless steel pipe, using shaft-lock structure and shaft core treated with thermal refining, chrome plate and surface ground.
  • Roller diameter :
    Model CLC-Q2-0920 CLC-Q2-1224 CLC-Q2-1628
    Outer Diameter Ф306 Ф389m Ф434 mm
    Including die Ф322 Ф405mm Ф450 mm

  • Hardened steel cover with pneumatic-lock cylinder set at upper roller can hence durability of using.
  • Die-cutting anvil is covered by rubber(Made from Italy). Ring mounting structure is adopted.
  • Mechanical differential structure is applied for the adjustment of transverse register. The adjustment range is ±30mm. Its movement keeps the surface of rubber flat and smooth. Taiwan anvil rubber is used.
  • The gap of die-cutting anvil is manually adjusted; with dial indicator, and the adjustment range: 0-15mm.
  • With automatic anvil grinding knife, The Anvil rubber can be used circularly and prolong its life time.
  • Die-cutting anvil is designed with One-way clutch Mechanical linear speed compensation. As customers request, Frequency control of independent motor for line speed compensation is optional.


Flexo Printer Slotter Die Cutting with Stacker

Die Cutting Cylinder

  • Made from seamless steel pipe, using shaft-lock structure and shaft core treated with thermal refining, chrome plate and surface ground.
  • Outer diameter.
    Model CLC-Q2-0920 CLC-Q2-1224 CLC-Q2-1628
    Outer Diameter Ф257 mm Ф360 mm Ф487 mm
    Including Die Ф305 mm Ф408 mm Ф535 mm
  • Cross line engraved on the surface of die-cutting cylinder. M10 screw holes are attached on the surface of cylinder. And holes distance is international standard.
  • Wooden die height is H25.4mm for installation
  • Lighting lamp is installed on the pull arm above the cylinder, for night work.

Guiding Upper/Lower roller

  • Upper roller is made from solid steel pipe, equipped with two sets of creasing rings, which are able to quickly move along with rack and control manually.
  • Lower roller is surface ground and chrome plated, balance corrected and stable running.
  • The gap of lower roller is manually adjusted with self-locking system, dial indicator, the adjustment range: 0-11mm.

Die Cutting Register Adjustment

  • Planetary gear structure, 360ºprecisely adjusted.
  • Die-cutting register is digitally motorized, auto zero and auto reset.
  • Die-cutting cylinder transverse moving is digitally motorized, and the adjustment range: ±5mm.
  • Fix register is pneumatically controlled by brake structure. When the units are opening or registering, Brake structure stop the machine running. So that keeps the die-cutting cylinder position.