• Shed No. 12, Scheme 1, Phase II, DSIDC, Okhla Ind. Area, New Delhi, India 11002

illustration Of Machine Units

illustration Of Machine Units

Feeding Unit.
Mechanical Lead edge feeder CLC-Q2-0920
Skip feeding is available.
Sheet cleaning system includes upper suction motor and brusher.
AMotorized control of the movement of Unit On-Off. For safety an audible alarm sounds while the units moving.
Frequency control of main motor, and there is a protective device for main motor running. (the machine can’t run when the units are not locked).
Pneumatic brake device is attached on the driving shafts to avoid machine damage while there is a faulty operation.
PLC control, touch screen operation, and pneumatic self-locking system.
It could reduce the feeding error and increase the printing accuracy, slotting and die-cutting precision thanks to sheet front orientation.
Little vibration and speed-up.
Frequency converter controls the air volume of suction. And correctly adjusted by sectional knob.
The volume and pressure are manually controlled to match different sizes of paperboard.
The side guides (right left movement) are motorized,Back stop (descending & ascending) is manual, Back stop (front/back) is motorized. Front guide is manual.
Side squarer set along with side guide.
Side squarer set along with side guide.
The Upper feeding roller is made of quality steel and covered with wear-resisting rubber, surface grooved; the hardness of rubber is 38 degrees; Also cylinder buffer device is adopted to avoid paperboard breakage.
The lower feeding roller is engraved and hard chrome planted, increasing friction to ensure feeding accuracy.
The second upper feeding roller with 4pcs creasing rings, which is covered with wear-resisting rubber. The rubber surface grooved to avoid the damage of paperboard strength.
The Second lower robber made of seamless steel pipe, which balance corrected and precisely ground and surface chromed.
The pressure of lower roller is manually adjusted, dial indicator, the adjustment range is 0-11mm.
Printing Cylinder.
It is made of seamless steel pipe, which balance corrected and chrome plated and surface ground. The shaft core treated with thermal refining, which makes becoming wear-resistance.
Model CLC-Q2-0920 CLC-Q2-1224 CLC-Q2-1628
Outer Diameter Ф291mm Ф394mm Ф521mm
Including Printing Plate Ф 305mm Ф408mm Ф535mm
The entire printing plate slot is fit for 3x10mm printing plate hang-up bar.
Loading and unloading the printing plate could be controlled electronically by the pedal switch.
Safety control button set along with pedal switch ensure the operators security when loading & cleaning the printing plate.
Equipped with safety button for loading and unloading the printing plate.
Roll to Roll Transfer
Lower pressure roller is made of seamless steel pipe, precision ground, chrome plated and balance corrected, and the thermal refining of shaft core to make it become more anti-fatigue and toughness.
The pressure of lower roller is manually adjusted,dial indicator, the adjustment range is 0-11mm.
Upper guiding roller is made of solid steel pipe, precision ground, chrome plated and balance corrected, with 2pcs grooved guiding rings, can be quickly adjusted by hand.
Lower guiding roller is made of seamless steel pipe, precision ground, chrome plated and balance corrected, with 2pcs grooved guiding rings, can be quickly adjusted by hand.
The pressure of guiding roller is manually adjusted, dial indicator, the adjustment range is 0-11mm.
Rubber Roller (Inking Roller)
Rubber roller is made of seamless steel pipe, precision ground, chrome plated and balance corrected.
The surface of steel pipe is covered with wear-resisting rubber, which is ground precisely to achieve a better inking.
The rubber roller will keep running when the machine is stop, it is driven by a reducer motor.
The pressure between rubber roller and anilox roller is manually adjusted, dial indicator, the adjustment range: 0-6mm.
Steel Anilox Roller
anilox roller is made of high quality seamless steel pipe, and the shaft head adopts shrink fitting technologies, precision ground, chrome plated and balance corrected.
The delay function is adopted for feeding system automatically lifting.
The pressure between anilox roller and printing cylinder is manually adjusted, dial indicator, the adjustment range: 6-9mm.

Copyright © 2018 Natraj Corrugating Machinery Company. All rights reserved.| Designed and Promoted by Keywordindia.com